Qubino Flush Dimmer (Z-Wave IN 865.2 MHz)

Dim lights or control fans from your smartphone

  • Compatible with LEDs,Halogens,CFL and Low Voltage bulbs
  • MOFSET technology (works with all bulb types!)
  • Retrofit installation
  • Can be used with push button or switches
  • Extremely small module that fits inside switchboard (45 mm)
  • Z-Wave Plus Certified
  • 1 year warranty
SKU: ZMNHDD1 Categories: , Tags: ,



Z-Wave Qubino Flush Dimmer



Qubino Flush Dimmer has been designed to remotely dim LED lights. This is the first MOSFET – switching light device that can support low voltage halogen lamps, low voltage bulbs, dimmable fluorescent lights and dimmable LED bulbs.

It can also help you monitor your power consumption and control the temperature of your home if paired with a digital temperature sensor. Its small yet robust construction lets it function even in extreme temperature, ranging from a chilly -10˚C to a red-hot 40˚C.

The installation process is very easy and can be done in just a few simple steps. The specially designed casing makes connecting a device to the flush mounting box a task of just few seconds. 


Qubino Flush Dimmer - Multiple Features

One Device With Multiple Features

Qubino Flush Dimmer will let you remotely dim lights, but it can also perform a lot of other brilliant functions unlike any other other traditional dimmer. Its super compact size will occupy smaller volume than comparable devices.

Save Energy

It can measure the power consumption each device connected to it consumes. It itself has a very low power consumption of just 0.7 W and will also help you estimate your next utility bills.

Qubino Flush Dimmer - Save energy
Qubino Temperature Monitor


Control Temperature

It can also help you control the temperature of your home, if paired with a digital temperature sensor. And will help you create complex scenes and control any device related to set a temperature range.

1-Year of Warranty

Qubino Flush Dimmer comes with a 1 year of warranty which protects it from any manufacturing defects.



To install this device, you will need to perform these three simple steps.

Step 1. Remove the switch from the switchboard and disconnect all the wires.

Step 2. Connect the wires to the Shutter and insert it in the switchboard.

Step 3. Now simply screw the switches back to the switchboard.

For more information on Qubino Flush Dimmer 0-10V and its installation process, please go through the link: Z-Wave Qubino Flush Dimmer Manual


Qubino Flush Dimmer App

Universal Z-Wave Flush Dimmer to remotely control dimmable lights.

  • Full control over the Z-Wave network and Dimmable lights
  • MOSFET technology lets it work with all bulb types
  • Works brilliantly with LEDs, Halogens, CFL and Low Voltage bulbs
  • Monitors power consumption
  • Optional Temperature Sensor

Additional information



Wireless: Z-Wave Plus (868.42MHz) Voltage: 110 - 240V, 50Hz or 24 - 30V DC Load: 140W (resistive @ 230V AC), 21W (resistive @ 24V DC) Dimmer type: Trailing Edge (AC), PWM (DC) Power Measurement: ±2% accuracy Power Consumption: < 0.7W Operating Temperature: -10 to +40°C