Z-Wave Fibaro Flood Sensor Gen5

The brilliantly designed Z-Wave compatible Flood, Temperature and Tilt sensor.

  • Detects water to alert for floods
  • Inbuilt temperature sensor helps in controlling of ambient temperature
  • Unique sink-proof design which keeps it floating on the water
  • Reports tilt or movement to the main controller
  • Integrated siren and RGB LED indicator
  • Battery or VDC powered
  • Has been designed to be placed on the flood or mounted on the wall
SKU: FBFGFSZW5 Categories: , Tags: ,

Description

Z-Wave Fibaro Flood Sensor Gen5

Protect Your Home From Water Damage

This advanced Fibaro Flood Sensor has been designed to detect any kind of water leakage, flood condition or a sudden temperature change and notify you about any of these events immediately, preventing any major damage. Through its advanced technology, it can also be used to detect fire conditions.

If the Fibaro Flood Sensor detects a threat, it immediately communicates with the central controller, triggering an alarm and notifying you of the threat.

Its robust waterproof construction makes it nearly impossible to submerge. It will keep floating over the water to keep sending notifications to the center controller.

For the installation process, you will need to open its cover by turning it counter-clockwise, remove the battery blocker, after which the sensor will beep to confirm being powered, you can now simply add the device to the network and close the cover by turning it clockwise. For further information, please follow this page.

You can go through this Protection concept to know how home automation can save yours and your loved ones’ lives.

Z-Wave Fibaro Flood Sensor Gen5

Perfection In Every Way

The most technologically advanced Fibaro Flood Sensor is perfect in every way possible. It is only of of its kind, you find in the market. It has been equipped with advanced features, to protect you and your family from any unfortunate event.

  • Tilt Sensor: Your new Fibaro Flood Sensor can detect tilt upto 15 degrees. You will also be alerted when someone tampers with it.
  • Temperature Sensor: It can also be used to manage the floor heating system. It will work as a fire alarm if detects smoke and will notify you for the same.
  • Alarm Sensor: It will sound an alarm as soon as it detects fire, flood or if someone tampers with it.
  • Telescopic Probes: Its golden Telescopic Probes will help it work on even a concrete or uneven surface unlike another Flood Sensor in the world.
  • Visual Indicator Light Apart from just sounding an alarm, it will also indicate threat to you, with its inbuilt RGB lights.
Z-Wave Fibaro Flood Sensor Gen5
Z-Wave Fibaro Flood Sensor Gen5

Dual Tamper Protection

Its built in motion sensors will notify you as soon someone triggers with the motion or tampers your Flood Sensor. Any attempt to open the Sensor will be communicated to the main controller first and then to the you, on your smartphone or tablet. It will also make sure nobody moves it from it original place.

More Than You Need In A Flood Sensor

In some of the critical or hard-to-reach places where it is difficult to install the Fibaro Flood Sensor, you can always connect a additional wired probe to detect the leak. It can be hard wired or battery powered.
One end of the wired probe will be connected to the sensor as shown while the telescopic probe end with gold-plated pins will be placed at the place of detection.

Z-Wave Fibaro Flood Sensor Gen5
Z-Wave Fibaro Flood Sensor Gen5

Impossible To Submerge

The Fibaro Flood sensor has a robust design to sustain any temperature within the range of -10 to +95 degree Celcius. It is capable of handling fast as well as slow floods.

Also, the entire enclosure of this Flood sensor is waterproof and so, is difficult for the sensor to submerge. it will float over the water so that it keeps sending signals to the main controller.

Visual Colour Display

The Fibaro Flood Sensor consist of a built-in illuminated LED light that shows the type of detection, like whether it has detected some water leakage, sudden rise/fall in the temperature, or out of range of the Z-Wave network.

For each of the different applications above, the LED light will blink up in different color.

Z-Wave Fibaro Flood Sensor Gen5
Z-Wave Fibaro Flood Sensor Gen5

Easy Installation

For a more detailed information on the installation process on Flood Sensor, please follow this page.

Z-Wave Network Range Tester

It has been built to assure that the sensor is working perfectly all the time. Using the Z-Waves it makes sure that you stay connected to controller from long distance and even through indirect connectivity. The built-in LED will always keep you informed if the sensor has a good range and can communicate with the Fibaro system without any error or if it requires a different location.

Wireless Update

It will notify you as soon there is an update for the device is available for a better functionality. All you need to do is to accept the download by a click on your smartphone and the sensor will do the rest, giving you a complete peace of mind.

Additional information

Protocol

Brand

×

Hello!

Click one of our representatives below to chat on WhatsApp or send us an email to inquiries@smartify.in

×