Villa automation · Bengaluru
From the gate and perimeter to every floor, tank, pump, lighting circuit, curtain, climate zone, and backup-power path—one considered system for the way your villa actually works.
Rooms are only half the brief. A villa also has a plot, perimeter, utilities, and multiple floors to coordinate.
One systemAcross rooms, floors, and outdoor zones
Two pathsDesigned for new builds and finished villas
Manual fallbackEssential controls remain familiar
ExpandablePlan the backbone, add in sensible stages
The whole-property view
A standalone smart switch cannot coordinate a gate, pump, garden, and three floors. We design the connection points first, then choose the right control layer for each job.
Open, close, monitor, and include the gate in arrival or away scenes.
Coordinate cameras, locks, contact sensors, and after-dark alerts.
Control indoor, facade, driveway, and garden lighting by zone.
Schedule privacy, glare control, and room-by-room motorised movement.
Run ACs and ventilation around occupancy, floors, and daily routines.
Bring television, home theatre, and multi-room audio into shared scenes.
Automate sump, pump, tank levels, irrigation, and leak alerts.
Keep essential hubs and control paths on the villa’s inverter or UPS.
Start from where your villa is
The goal is the same—a reliable whole-property system—but the drawings, hardware, and installation sequence are different.
Before the walls close
Bring automation into the electrical conversation early, while every cable route and panel decision is still inexpensive to change.
Keep the interiors you already love
Start with the existing switch boxes, wiring, network, motors, and power backup. We design around what is genuinely reusable.
Designed for Bengaluru realities
Across Bangalore’s villa corridors, the useful automations are often outside the drawing room: a gate you can check from traffic, a pump that stops at a full tank, a leak alert during a downpour, or a mesh that reaches the top floor and garden.
Internet loss, a power cut, or a hub issue should not make an essential light, gate, or pump impossible to operate.
Large gated communities and villas need reliable garden, entry, and remote-access coverage beyond the living room.
Fast-moving new construction makes early electrical coordination especially valuable before ceilings and panels close.
Long workdays make gate status, cameras, locks, and away-mode alerts useful from anywhere in the city.
Larger plots call for deliberate Wi-Fi, Zigbee, camera, gate, and perimeter planning rather than a room-only setup.
Existing houses in areas such as Jayanagar, JP Nagar, and Indiranagar benefit from retrofit-first planning that respects finished interiors and older electrical layouts.
Indicative planning ranges
These ranges help with early planning. Your fixed proposal follows the site survey and depends on switch points, floors, plot coverage, brands, and integrations.
High-impact essentials
₹3–4.5 lakh
Common whole-villa brief
Most complete briefs
₹4.5–6.5 lakh
Complex, integrated estates
₹6.5–8 lakh+
Planning ranges only, inclusive scope to be confirmed after survey. Final pricing varies with device brands, electrical interfaces, civil readiness, and selected systems.
From brief to handover
Each stage leaves the next team with a clear decision, drawing, or configured system.
We map the property, family routines, must-have controls, and the systems that need to work together.
You receive a room, floor, and plot-level plan—not a disconnected shopping list of smart devices.
For new builds we coordinate drawings and panels. For finished homes we inspect wiring and switch boxes.
Hardware, network, scenes, alerts, manual fallbacks, and household access are configured as one system.
Your family learns the everyday controls, and the system is documented for future additions and service.
Free villa consultation
Tell us where the villa is and whether it is being built or already finished. We’ll help define the right survey and planning next step.
Required fields are marked with an asterisk.
A Smartify expert will review the project details and call you. Prefer to continue now?
Continue on WhatsAppBefore the site survey
Practical answers about timing, cost, retrofit work, connectivity, and the parts of the property that can be connected.
Read what the free consultation includes →A practical whole-villa project commonly starts around ₹3 lakh and can exceed ₹8 lakh for larger plots, premium keypads, extensive security, architectural lighting, home theatre, and deep integrations. Switch-point count, floors, plot coverage, brands, and project stage matter more than built-up area alone, so the final figure follows a site survey.
Ideally before the electrical drawings and panel schedules are frozen. That gives the architect, electrician, lighting designer, and automation team time to coordinate cable routes, panels, network points, curtain power, gate control, and future expansion without rework.
Usually, yes. Retrofit modules and compatible smart switches can work with existing wiring and switch plates. Some additions—such as motorised curtains, new cameras, or a powered gate controller—may need a local power or network run, which we identify during the survey before quoting.
Physical switches remain the primary fallback. Systems designed for local execution can keep selected scenes and schedules running without internet, while remote access and cloud alerts pause. Essential hubs, the router, and gate controls can be placed on an existing inverter or UPS circuit for power-cut resilience.
Yes. Gate status, pumps, sump and overhead-tank levels, irrigation, facade lighting, garden lighting, and outdoor sensors can be brought into the same control plan, subject to the existing motors, panels, and safe electrical interfaces on site.
Yes. For new villas we coordinate automation requirements with the architect, interior designer, electrical consultant, and site electrician. We can mark device locations, cable routes, panel needs, network points, and handoff responsibilities before installation.
We work across Bengaluru and surrounding villa corridors, including Whitefield, Sarjapur Road, Electronic City, North Bengaluru, Devanahalli, and established independent-home neighbourhoods. Survey availability is confirmed when you share the project locality.
Typically replies instantly
Hi there! 👋
How can we help you with your smart home needs?