Z-Wave Fibaro Relay Switch 1 * 2.5 KW


  • Controlled through other Fibaro devices or any Z-Wave controller.
  • Microprocessor controlled.
  • Our ON/OFF Relay Switch is the smallest device of the type in the World!
  • Controls Load upto 2.5KW (10A)
  • No need to replace switches: Fits behind existing switch in back box

Out of stock


Z-Wave Fibaro Relay Insert 1* 2.5 KW

With Fibaro, Control Your Home From Anywhere

Fibaro Relay Insert is a radio controlled On/Off Switch which is designed to operate electrical devices through radio waves or wall switch connected directly to it. The Relay Insert will help you easily actuate a connected electrical appliance with load upto 10A or 2.5KW.

This microprocessor controlled device can also be used to send signals to any system that is to be integrated with the Fibaro system.

This compact Radio controlled Fibaro Relay Insert is designed to be installed in standard wall switch box or in the locations where control on an electric device is needed. Relay Insert can only be used with the AC power supply and needs 3 wire, including a neutral wire for installation. For more information on 2-wire and 3-wire lighting system, please follow this link.

Control Your Lights And Appliances Through Z-Waves


This product has been designed to make your life simpler. With it you will be able to control and operate all different kinds of electrical devices with the load upto 10A and 250KW. The air conditioners, washing machine, fans, television, lightings and boiler are just a few to name.


Compact and Ultra-Modern Design


You new Fibaro Relay Insert 2.5KW is only 42.5 mm long, 37.0 mm wide and 15.9 mm high, which makes it the world’s smallest devices of its kind. Its perfect looks, brilliant construction and reliability is just another advantage. Buy this product with confidence and make your home smarter.




The installation of this product can be easily be done in just 3 minutes. For installing your Relay Insert you need to remove a given switch, like the one responsible for operating the lights from the wall, then disconnect it from the attached wires and connect your Relay Insert to those wires. Installation process will be completed when you screw the in the wall.


Additional information



Technical Data:

  • Power Source 110 - 240V~, 50/60Hz,
  • Max. AC output (resistive loads only): 10A / 110 - 240V~, 50/60Hz
  • Max. power output (resistive loads only): 2,5kW, 110 - 240V~, 50/60Hz
  • Ambient temperature: 0 - 35o C
  • To be mounted in standard wall switch boxes Ø ≥ 50mm, depth ≥ 60mm
  • Radio protocol: Z-Wave
  • Radio Frequency 868,4 MHz EU; 908,4 MHz US; 921,4 MHz ANZ; 869,0 MHz RU
  • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure)
  • Outside dimmensions (L x W x H) 42mm x 38mm x 20mm.

Fibaro Relay Switch Installation

Fibaro Relay Switch Inclusion