Course
Wired KNX for new builds.
How a KNX installation is put together, when wired is the right choice, and how to commission and hand it over.
Intermediate · 3 lessons · about 14 min of reading · Free
By Abhi Bavishi, Founder, Smartify
Technical review pending for some or all lessons
What you will learn
- Read a KNX topology: lines, couplers and power supplies
- Understand physical and group addresses and what ETS does
- Decide whether KNX fits the project
- Commission and hand over with the documents the client needs
Course content.
3 lessons · about 14 min
1 KNX Basics for Indian Residential Projects: Topology, ETS, Group Addresses and Power Supply 4 min
How a wired KNX system is put together: lines and couplers, the bus power supply, physical and group addresses, and what ETS does. Written for installers and designers deciding whether KNX fits a villa or a new build.
Open this lesson →2 Choosing a Protocol by Project Type: Villa, Apartment, Retrofit and New Build 4 min
A practical way to pick wired, Zigbee, Thread, Matter or Wi-Fi equipment for the job in front of you. Start from the building and the client's constraints, then check the questions that decide whether a choice will hold up.
Open this lesson →3 Commissioning and Handover Checklist for Smart-Home Projects 6 min
A gate-by-gate checklist for the last week of a smart-home job: naming and labelling, function and failure tests, security, backups, owner training, acceptance and the handover pack. Works for wireless, Matter and KNX systems.
Open this lesson →Before you start
- Some electrical knowledge helps.
- Mains work stays with a qualified electrician.
Who this is for
Integrators and electricians working on new builds and major renovations.