Qubino Flush Shutter (Z-Wave IN 865.2 MHz)

Abhi Bavishi

7 years ago

Qubino Flush Shutter (Z-Wave IN 865.2 MHz)

Z-Wave Qubino Flush Shutter

Flush Shutter has been constructed to control the motor of blinds, roller, shades, venetian blinds and other similar sunscreens from 24V DC to 230V AC. You can either control them using the Z-Wave network or through the wall switches. It can also support the connection of a digital temperature sensors, which means, if paired with a temperature sensor, it will help you to control the temperature of your home with ease. Its inbuilt power consumption meter will help you save energy.

Qubino Flush Shutter is the most tested Z-Wave microcontrollers on the market. Its extremely compact size makes it snugly fit into any switchboard. This module can work with mono-stable (push buttons) and bistable switches. The installation process is very easy which eliminates the help of a professional. It can be done in just a few simple steps. The specially designed casing makes connecting a device to the flush mounting box a task of just few seconds.

Create Your Own Sunrise

Qubino Shutter will let you control your blinds, venetian blinds, rollers and shades from the comfort of your smartphone. It can also help in detection of the blind position. It can also open the blinds of your room to wake you up in the morning and create various other scenes, giving you an experience like never before.

Power Monitoring

It can help you monitor the power each of the connected electrical devices consume. Flush Shutter itself has an extremely low power consumption (0.4W) that will help you save energy and estimate the next utility bill.

Temperature Sensor

Qubino Flush Shutter can also work as temperature sensor if paired with a digital temperature sensor that will allow to to control the heating and ventilating motor of your home with ease.

1-Year Warranty

Qubino Flush Shutter comes with a 1 year of warranty which protects it from any manufacturing defects.

Installation

It will need 3 wires, including the neutral wire for installation. You will need to disconnect the power supply before installing your Flush Shutter.

To install your Flush Shutter, you can follow these three simple steps :-

Step 1. Remove the switch from the switchboard and disconnect all the wires.

Step 2. Connect the wires to the Shutter and insert it in the switchboard.

Step 3. Now simply screw the switches back to the switchboard.

The Shutter Plus has a different wiring for the external switches. Please refer to the included manual before you install your device. For a detailed information on Qubino Flush Shutter and its installation process, please go through the link :- Qubino Flush Shutter Manual

Remotely control motors of blinds, rollers, shades, venetian blinds, etc.

Controls blinds and awnings through Z-Wave network.
Monitors power consumption
Temperature Sensor (Optional)
Fits into any standard switch box because of its compact and smart body.
Easy DIY installation process