Z-Wave Qubino Flush Shutter DC
Flush Shutter has been constructed to control the motor of blinds, roller, shades, venetian blinds and other similar sunscreens from 24V DC to 230V AC. You can either control them using the Z-Wave network or through the wall switches. It can also support the connection of a digital temperature sensors, which means, if paired with a temperature sensor, it will help you to control the temperature of your home with ease. Its inbuilt power consumption meter will help you save energy.
Qubino Flush Shutter DC is the most tested Z-Wave microcontrollers on the market. Its extremely compact size makes it snugly fit into any switchboard. This module can work with mono-stable (push buttons) and bistable switches. The installation process is very easy which eliminates the help of a professional. It can be done in just a few simple steps. The specially designed casing makes connecting a device to the flush mounting box a task of just few seconds.
|
|
Create Your Own Sunrise Qubino Shutter DC will let you control your blinds, venetian blinds, rollers and shades from the comfort of your smartphone. It can also help in detection of the blind position. It can also open the blinds of your room to wake you up in the morning and create various other scenes, giving you an experience like never before. |
|
Power Monitoring It can help you monitor the power each of the connected electrical devices consume. Flush Shutter itself has an extremely low power consumption (0.4W) that will help you save energy and estimate the next utility bill. |
|
|
|
Temperature Sensor Qubino Flush Shutter DC can also work as temperature sensor if paired with a digital temperature sensor that will allow to to control the heating and ventilating motor of your home with ease. |
|
1-Year Warranty Qubino Flush Shutter DC comes with a 1 year of warranty which protects it from any manufacturing defects. |
|
|
Installation To install your Flush shutter, you can follow these three simple steps :- Step 1. Remove the switch from the switchboard and disconnect all the wires. Step 2. Connect the wires to the Shutter and insert it in the switchboard. Step 3. Now simply screw the switches back to the switchboard. For a detailed information on Qubino Flush Shutter and its installation process, please go through the link :- Qubino Flush Shutter DC Manual
|